|
|
 |
By developing a culture where continuous improvement, lean thinking and Six Sigma are practiced across all divisions and throughout the organization, Barnes Aerospace ensures superior customer service, reduction in turn-times and competitive prices.
Our certifications include the following:
MANUFACTURING
Barnes Aerospace Lansing (+)
Quality System Certifications/Approvals
- AS9100 - Revision B and ISO 9001:2000 Certified by Intertek Testing NA, Inc. Certificate Registration Number: US-4373
- Initial Certification: November 13, 1998
Special Process Approvals
- Nondestructive Testing
- Penetrant Inspection
- Heat Treating/Furnace Brazing/Hot Forming/Hot Sizing
- Titanium Alloys
- Nickel and Cobal Alloys
- Stainless Steels
- Chemical Processing
- Chemical Etching
- Chemical Cleaning
- Chemical Milling
- Swab Etching
- Material Test Lab - ISO 17025
- Chemical
- Mechanical
- Metallography
- Hardness
- Non-conventional Machining
Customer Approvals
- Boeing
- Pratt & Whitney Canada
- GKN
- Bombardier
- Rolls-Royce
- General Electric Aircraft Engines
- Lockheed Martin
Barnes Aerospace Ogden (+)
Quality System Certifications/Approvals
- ANSI/ISO/ASQ Q9001-2000 AS 9100 Rev B - Certificate No. 111149
Special Process Approvals
- Nadcap Certifications
- Welding
- Nondestructive Testing
- Penetrant Inspection
- Radiography
- Heat Treating/Furnace Brazing/Hot Forming/Hot Sizing
- Titanium Alloys
- Nickel and Cobalt Alloys
- Stainless Steels
- Chemical Processing
- Chemical Etching
- Chemical Cleaning
- Conversion/Phosphate Coatings
- Primer/Paint/Dry Film Coating
- Material Test Lab
- Chemical
- Mechanical
- Metallography
- Microhardness
- Hardness
- ISO 17025
- Non-conventional Machining
- Laser Trimming/Machining
- EDM Machining
Quality System Certifications/Approvals
- ISO9001; AS9100, 3rd Party Registrar-PRI
- General Electric - (SRP) GE S-1000
- Honeywell Quality System
- Rolls-Royce Quality System
- Moog Quality System
- Aero Controlx Quality System
- Curtis Wright Quality System
- Turbomeca Quality System
Special Process:
- EDM GE (VSE) NADCAP
- FPI GE NADCAP P3TF2
- FPI GE NADCAP P3TF47
- FPI Turbomeca CCTLC418
Self Release
- Honeywell Tempe
- Honeywell Phoenix
- Honeywell Rockymount NC
- Aero Controlx
- Curtis Wright
- General Electric DSQR
- Moog
Barnes Aerospace Singapore (+)
Quality System Certifications/Approvals
- ISO9001:2000 and EN/JISQ/AS91000:2004 Registered through Det Norske Veritas (DNV), Certificate Number: CERT-12232-2007-AQ-HOU-ANAB, Manufacture of Aircraft Engine Components (Excluding Clause 7.3: Design and Development)
- NADCAP Certifications
- Aerospace quality Systems
- Nondestructive Testing - Liquid Penetrant Inspection
- Surface Enhancement - Shot Peening
- Heat Treating - Vacuum Heat Treat/Vacuum Braze
- Welding - Fusion Welding
- Non-conventional Machining - Electrical Discharge Machining
- General Electric
- GE S-1000
- GE GT193 - Liquid Penetrant Inspection
- GE GT193 - Shot Peening
- GE GT193 - Vacuum Heat Treat/Vacuum Braze
- GE GT193 - Fusion Welding
- GE GT193 - Electrical Discharge Machining
Barnes Aerospace West Chester (+)
Quality System Certifications/Approvals
- AS9100
- ISO9001
- General Electric Quality Systems
- Snecma Moteurs Quality Systems
Special Process Approvals
- Nadcap Certified for Fluorescent Penetrant Inspection
- Nadcap Certified for Vacuum Brazing / Heat Treating
- Nadcap Certified for Resistance, Fusion and Plasma Arc Welding
- Nadcap Certified for Nonconventional Machining (Laser and EDM)
- Nadcap Certified for Glass Peening
- GEAE Approved for Glass Peening
- GEAE Approved for Laser Beam Machining
- GEAE Approved for Electrical Discharge Machining
- GEAE Approved for Vacuum Brazing / Heat Treating
- GEAE Approved for Bradelloy
- GEAE Approved for Resistance, Fusion and Plasma Arc Welding
- GEAE Approved for Fluorescent Penetrant Inspection
- Snecma Approved for Furnace Brazing per DMP45
- Snecma Approved for Fluorescent Penetrant Inspection Sensitivity S2 per DMC0010
Barnes Aerospace Windsor (+)
Quality Control Systems
- MIL-1-45208 A, MIL STD-45662; ANSI/NNCSLZ5401
- ISO9001; 2000 AS9100, ISO 10012-1; 3rd Party Registrar-Intertek Testing Services (ANAB) Certification # 97-993d
- General Electric - GE S-1000 and GE P-1000 (GE 90)
- Pratt & Whitney - ASQR-01
- Pratt & Whitney Canada - CPW 107/ ASQR-01
- SNECMA- QA00725
- Rolls-Royce - SABRe 9000
Approved Process
- EDM (NADCAP) - GE S422
- EDM (NADCAP) - PWA 97-2-7, 8
- EDM (NADCAP) - CPW 350-1, 2, 3
- EDM (NADCAP) - RRS418 (Rolls-Royce)
- Riveting - PWA 357
- FPI (NADCAP) - GE -P3TF2,P3TF44,P3TF47,NAS410
- FPI (NADCAP) - FPM code 1, 2, 7, per FPM Master N (PWA)
- GE Clean Test - per E50TF535
- GE Hole Drilling - per P11TF12
- PWA - LCS QASR
- GE - LCS DSQR
- PWC - LCS QASR
Self Release
- PWA - QASR
- GE - DSQR
- PWC - QASR
- Rolls-Royce - DSQR
AFTERMARKET
Barnes Aerospace Windsor Airmotive - East Granby (+)
- AS9100 Rev B/ISO 9001:2000 (design excluded) in accordance with ISO 9104A for Overhaul, Inspection and Repair of Gas Turbine Engine Components. Certified by STR-R, LLC. Registration number: 07-35072
Customer Certifications
- Pratt & Whitney
- Rolls-Royce
- Full repair and overhaul of accessories (to manual or equivalent)
- Engine part (component) repair or partial repair (operation assistance) to specific instructions
- RPS 128, 184, 356, 388, 461 (not pre-penetrant), 474, 574, 620,701-F1B, 704, and 953
- General Electric Aircraft Engines
- GT 193 - Welding,
- GT 193 - Heat Treat and Vacuum Brazing
Approved Source for
- American Airline
- United Airline
- Northwest Airlines
- U.S. Airways
- Delta
NADCAP Certifications
- AC7102 C - Heat Trating
- AC7102/1 C - Brazing
- AC8101/4 C - Material Testing Laboratories - Metallography and Microhardness (L, L7)
- AS7003 - Welding
- AS7114 - Nondestructive Testing
Government Certifications
- Federal Aviation Administration, FAA Air Agency Certificate Numbers KC1R265K and ZWDY470L, FAA Repair Station Limited Specialized Service and Limited Powerplant
- Joint Aviation Authorities of Europe, JAA Repair Station No. KC1R265K
- Civil Aviation Authority of China, Maintenance Organization Certificate No. F00100457
Barnes Aerospace Windsor Airmotive - West Chester (+)
- ISO 9001:2000 and AS9100: Aircraft Engine Component Repair; Excluding Design and Servicing. Registered through PRI Registrar
- Federal Aviation Administration, FAA Air Agency Certificate Numbers KKWR148K, FAA Repair Station for Limited Powerplant
- General Administration of Civil Aviation of China Certificate No. F.00100456: Component Inspection, Repair, Overhaul and Modification of Components for Engine (internal)
- European Aviation Safety Agency FAA Repair Station Number: KKWR148K
Barnes Aerospace Windsor Airmotive - Asia (+)
- ISO9001:2000 and EN/JISQ/AS91000:2004 - Certified by Det Norske Verit (DNV), Certificate Number CERT-11577-2006-AQ-HOU-ANAB, Overhaul of Gas Turbine Engine Components and Manufacture of New-Made Parts (Exclusing Clause 7.3: Design and Development)
- NACAP Certification
- Aerospace Quality Systems
- Nondestructive Testing - Radiographic Inspection
- Welding - Electron Beam Welding
Customer Certifications
- General Electric Aircraft Engines
- GE S-1000
- GT193 Radiographic Inspection
- GT193 Magnetic Particle Inspection
- Pratt & Whitney
- Rolls Royce
- C.A.S.E. - Japan Airlines
Government Certifications
- Federal Aviation Administration, FAA Air Agency Certificate Number ZWDY470L, FAA Repair Station Limited Powerplant
- European Air Safety Agency (EASA), Approval Certificate, Reference EASA.145.0040
- Civil Aviation Authority Of Singapore, Certificate of Approval No. AWI/106
- General Administration Civil Aviation of China, Maintenance Organization Certificate No. F06500262
- Transport Canada Civil Aviation (TCCA) Letter of Acceptance dated June 15th 2007
- DCA Malaysia Certificate of Approval Recognition, Reference Number AO/-0105/00
|
|
|
